How Good Is 3DMakerpros MOOSE? (vs Creality RAPTOR)

 

The MOOSE scanner uses blue LED flashes (not laser!) for scanning, featuring AI-powered tracking and alignment. It doesn't require tracking markers—although scanning spray is still necessary for transparent or reflective surfaces. Get your 🫎 Moose here (EU, Affiliate)  or international store Discount Code: ⭐RCS30 for 30€ off!

🔹 Positioning: Ideal as a quick tool for referencing objects in 3D design. It delivers better detail and accuracy than budget NIR-based scanners but falls short of premium laser scanners like the Creality Raptor.

🔹 Creality Raptor Comparison:
- Costs around €1100 (sale) up to €1800 retail
- Offers higher accuracy with laser tech
- Requires tracking points and a powerful GPU
- Best suited for scanning small objects

🖥️ Performance Notes:
- Works best on high-end PCs (e.g., Core i9 285K + RTX 4070Ti)
- Acceptable results even on older laptops
- First test (DolphinPro gimbal canopy) was smooth, though software sometimes stutters and loses AI tracking

🎨 Texture Mode:
- To avoid long processing times, reduce mesh complexity below 100K faces
- Excellent image quality for texture mapping

📦 What’s in the Box (luxury bundle, choose basic bundle to save money as the tripod isn't that great, the turntable not important and you can order a cheap case if you need one)
- Nice carrying case
- Power supply & long USB cable
- USB-powered turntable (no power switch)
- Mini tripod (not super stable)

Anycubic S1 Combo Review: Printer Shines, ACE Pro Disappoints (Real-World Testing!)

 

Get the Anycubic S1 Combo with CODE: ANYKS1 549€ for printer and Filament Box

or my suggestion - the PRINTER ONLY with CODE: AKOBRAS1 369€ !!!  

My Philosophy: Honest, "almost scientific" testing, I test products rigorously and share honest opinions—even if it costs me affiliate earnings (like in this case for sure :). Using my affiliate links supports my work at no extra cost to you! Huge thanks!🙏 

Rinkhals firmware mod: https://github.com/jbatonnet/Rinkhals

Sidespool mount

🌐▬▬▬▬INFO▬▬▬▬▬▬▬▬▬▬▬▬▬▬🌐

Kobra S1 Size: 400x410x490 mm

ACE Pro Size:   366x283x235 mm

min 80-90 cm height if AMS on top!

25x25x25cm buildroom! 

120° heatbed (although not uniformly heated up - and better add 10°)

320° nozzle max temp

speed a bit lower than bambu, color changes 2:47 - slow, not very efficient

Printquality is quite good!

💡install "Rinkhals" (modded firmware addon)

why? to get a good WebUI (Mainsail)  http://your-printer-ip:4409

and also full Orca-Slicer (with upload and print), minus the multimaterial handling

Good thing: Anycubic Slicer / phone app still works - so you can use both.

I left the printer in Cloud mode (so phone app works outside of my LAN), got a minor warning on rinkhals that I will not see printer listed...

RINKHALS howto:

- download update....swu file, https://github.com/jbatonnet/Rinkhals

- rename it to update.swu and copy it on the USB Stick (fat32), in SPECIFIC dir: "aGVscF9zb3Nf" 

- plug in the USB stick and wait for the install bar (20sec)

Note: if you get a new firmware update on the KobraS1 (official from Anycubic), you just need to download the rinkhals file again (make sure new firmware is already supported). 

SLICER: https://www.anycubic.com/orcaVersionDownload

Anycubic Slicer next  (S1 support), better to use 2.4GHz wifi? 

Orca:  use Octo/klipper:  and your-IP:4409  in LAN settings

CREALITY Scan Raptor TEST and TUTORIAL!

🌐▬▬▬▬LINKS▬▬▬▬▬▬▬▬▬▬▬▬▬▬🌐 ✅ Software and info ✅ 3D Scan markers ✅ Scanning spray: buy cheap foot spray! 2.5€ / can

💡 my LIBRARY of SCANNED OBJECTS: 🎮🌐📷📱 (will be growing over time, request scans if you think I have the phyiscal object)

please check my PATREON (I could hide all my content behind an paywall - but I don't ;) 🙏 DO YOU WANT TO SEE MORE??? ►TOP Videos ►Mountain DIVES ►Product REVIEWS ●▬▬▬EQUIPMENT▬▬▬▬▬▬▬▬▬▬▬▬▬● Filmed with: Sony A7c, DJI Mic2, OBS, Oneplus 12, edited with Premiere Pro ╔═╦╗╔╦╗╔═╦═╦╦╦╦╗╔═╗ ║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣ → http://goo.gl/szFJv ╠╗║╚╝║║╠╗║╚╣║║║║║═╣ (best way to support me!) ╚═╩══╩═╩═╩═╩╝╚╩═╩═╝ (¯`·.¸¸.·´¯`·.¸¸.-RCSchim-.¸¸.·´¯`·.¸¸.·´¯) ► RCSchim@gmx.at ► https://www.FACEBOOK.com/RcSchim ► https://www.PATREON.com/RCSchim ► https://TWITTER.com/RCSchim ► https://www.INSTAgram.com/rcschim ●▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬●

Creality K1 MAX - ULTIMATE test, rooting, manual levelling, Mods...

►K1max 🛒Creality

►or at Geekbuying  (use CODE ⭐NNNDEK1M⭐  for 665€!!! 

►and TomTop

I deliver honest opinions, well researched and tested (sometimes "almost scientific" ;) reviews! If you can support this idea please check my PATREON 🙏

📋 Infos (covered in this test):

Many components shared with k1

+ LARGER buildplate!

+ Lidar

+ spare hotend and nozzle

+ Glass top lid

+ filament sensor inside 

🐳Orca Wifi print only with rooted Klipper 

- but device tab can show crealitys gui

- upload and print over that if one doesn't wanna root and update!

      Tip: You have to HOME all axis before you can start printing this way 

      Error msg:  "please return to the printer..."  

      really means "home the printer axis"

- came with pretty old firmware (1.3.0.39 from July/2023) and said this is the most current?

- used USB Stick and downloaded firmware 1.3.3.8 (March/24) from here

- enabled root access in settings (on printer LCD)    

- only after you update to the most current firmware, you can have root access:    user: root      pwd: creality_2023

💡 ROOTING guide here  

or in short (once connected via SSH to your printer, run these 2 commands):

1. Download the HELPER script:  

git clone https://github.com/Guilouz/Creality-Helper-Script.git /usr/data/helper-script

2. RUN the script: 

sh /usr/data/helper-script/helper.sh

(and here just install the essentials + maybe OctoEverywhere)

if you need to roll back to ORIGINAL Firmware

some more tips 💡:

✅ df -h   to check used diskspace...

✅ go thru this for correct date/time

✅ download Timelapses via the net:

(use WinSCP proggy and user: root / pwd: creality_2023 to logon)

copy files from here:    /usr/data/creality/userdata/delay_image/video

✅Make sure your K1max Bed is LEVEL!

heat up the bed to your normal print temp

let it measure the auto bed mesh  (lcd, or gui)

not the difference and try to counteract them with those "washers"

🌐▬▬▬▬LINKS▬▬▬▬▬▬▬▬▬▬▬▬▬▬🌐

►Creality K1max: https://shrsl.com/4ifxf

►Geekbuying: https://www.geekbuying.com/go/8duqdpRl   use CODE: NNNDEK1M  for 665€!!! 

►Manual level WASHERS: https://www.printables.com/de/model/681528-bed-shims-fits-creality-k1-and-k1-max

►Creality firmware: https://www.creality.com/pages/download-k1-max-flagship

►ROOTING guide here:  https://guilouz.github.io/Creality-K1-Series/helper-script/helper-script-installation/

DO YOU WANT TO SEE MORE??? ►TOP Videos ►Mountain DIVES ►Product REVIEWS

🔖▬▬▬VIDEO INDEX▬▬▬▬▬▬▬▬▬▬▬🔖

00:00 Intro

01:19 unboxing

02:54 K1 vs K1max

03:28 closer look on the K1max and first steps

04:43 Filament changes

05:17 manually leveling with printed washers

07:18 K1max firmware update with USB stick

08:25 installing MOONRAKER

11:53 Root or not? Orca Wifi printing

12:55 TEST PRINTS

15:27 side spool holder

16:52 AI Scan with LIDAR

17:22 TPU

18:47 ABS Skateboard wallmount

19:43 Birdfeeder dish

20:52 final mods

●▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬●

#Creality #K1max #3dprinter

Creality Scan Ferret Pro 3d Scanner - indepth review and Scanning tips!

What's in the box? 3D Scanner module (4 cams, was macht was?) hotshoe / tripod screw mountable mini tripod + (battery) grip (5ah 3,7v) phone clamp mount Wifi6 bridge ...and lots of cables (good quality with screws to prevent disconnect) Software avail as download for Windows/Mac, Android or IOS The cam-preview(s) via USB3 cable on the PC are much smoother and easier to work with - than on the phone via wifi (at least on my older Galaxy S10) Tip: use the scroll wheel of your mouse to zoom in the live view during scanning! - WIFI box für LAPTOP: works, but a but slower - wireless - larger scans... - cam preview speed slower (fewer FPS) than with USB3 of course SCANNING TIPS: -use a round-table ("lazy susan"), but no need for a motorized one... -start scanning looking at the obj from top down (30°?), make a few rounds than change cam angle slowly to view from the round table floor height slightly upwards - always keep an eye on the preview, it should be gree - if RED - stop and go back a bit - for complex parts, consider doing 2 scans and use the merge function to combine them! - use enough light (or it will loose tracking) maybe adjust the IR light exposure manually for better results - be slow and steady on your scans (or it will loose tracking) - use the "close Object" option!!! Makes it possible to print it! - use cut tool in slicer (Orca) to remove unwanted groundplate... ●▬▬▬LINKS▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬● Buy the Scanner here: https://www.geekbuying.com/go/8JsMWFEv (Afilliate) Coupon code: NNNDECRPRO (349€!) Software and downloads: https://www.creality.com/pages/download-cr-scan-ferret (it's a bit hard to find the correct pages on their website layout :) Help Page: https://wiki.creality.com/en/3d-scanner

please check my PATREON

FlashForge M5Pro - better than K1 or even BambuLab?

Check out the printer here for 579€ with coupon code: NNNDE5MPRO (valid until 31.Jan.2024) 🛒 https://www.geekbuying.com/go/8IGBW6kX (afilliate) ...or the cheaper version: Flashforge 5M for 399€ 🛒 https://www.geekbuying.com/go/8IGBZBUP no enclosure, no cam - ok if you don't need ABS/ASA or Nylon prints! 🛒Flashforge FILAMENT DEALS⭐: 3kg ASA - (White + Black + Natural): NNNDEASA3KG 49,99€ https://urlc.net/xv10 3kg High Speed PLA - (Color + Burnt Titanium + Nebula Purple): NNNDEFHS3 45,99€ https://urlc.net/vWC0 3kg Flexible Filament: NNNDE3FLA 59,99€ https://urlc.net/xv15 2kg PLA + 2kg Multicolor PLA: FLASH4 59,99€ https://urlc.net/xv18 4kg GalaxyPLA (Galaxy Red + Black + Blue + Grey): NNNDE4FLA 59,99€ https://urlc.net/vWC6 (all shopping links are afilliate links, I will get a small commission, you don't pay extra. The price will be reduced once you apply the code in the check out...) 📋 INFOs: ✅ Download most current FLASH Print here ✅ PROs: + fast AND good accuracy, quality! 300mm printspeed, 600 movement + very easy to operate, quick setup + quick-change nozzle! (0.4mm and 0.6mm included - spares cost 35€) + Printhead magnetic snapon (no screws) + camera included (easy access in WIFI over browser) ✅ CONs: - only 220x220x220 build volume (which is ok for most prints, but still limiting) - software: Orca wifi "upload+print" not (yet) available, only via USB Stick (you have to use their Flashprint for Wifi printing) - filament change wastes material because there's no retraction - no access to the webGUI - closed Klipper installation - not possible to turn on remotely…. (With wifi socket you can only turn it on in the standby mode, still needs a button press on the front) 💡Power consumption: 5w on standby, 13w when display is active +2w for LED light 💡 Tip on Port :8080 you can already access the Webcam (locally in your Lan/wifi): VIDEOSTREAM: http://192.168.YOURIP:8080/stream_simple.html Snapshot: http://192.168.YOURIP:8080/static_simple.html Cam settings: http://192.168.YOURIP:8080/control.htm ●▬▬▬LINKS▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬● I guarantee HONEST ❤️ reviews and opinions! If you wanna support this idea please check my PATREON ✅Artillery X3plus Cam mount: https://urlc.net/vWCi ✅FPV Monitor Clamp mount: https://urlc.net/xv2Y Orca / Flashforge github issue: https://github.com/SoftFever/OrcaSlicer/issues/2515 many print tests  @AuroraTech  🎥 https://www.youtube.com/watch?v=WgOd8BjTTdQ Really good in-depth reviews: MPOX: 🎥 https://www.youtube.com/watch?v=RgAcfazncHY

Creality K1 3D Printer review and improvements

🛒Creality K1 Coupon Code⭐: NNNCREK1⭐ (price is still 399€) 🛒Creality K1 Max Coupon code NNNCREK1MAX (699€)

please check my PATREON

I use EPIDEMIC SOUND, get your account here (affiliate): https://bit.ly/3p6OGE0

●▬▬▬LINKS▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬●

💡 good settings for different filaments Creality Slicer, Firmware and Manuals (easy start for beginners): more advanced (and currently the best) slicer: ORCA Slicer Print Objects: ✅ Side Spool-Holder ✅ 270° Door Hinges ✅ Human Skull ✅ Ikea Skadis Boxes (for pegwall) ✅ Stubby Screwdriver

________INFOS ________________________________________________ 💡Creality full open Klipper firmware: why? unlock many functions, get rid of their mobile app, limited web ui... how? ✅ update to latest firmware available, (via automatic update, or manually download Firmware here) and install it via USB Stick (format the stick if you have issues) ✅ enable root access (in the gears system menu) and note User: root pwd: creality_2023 ✅ use the "helper script" from here https://github.com/Guilouz/Creality-K1-and-K1-Max to have a nice menu to install: - Moonraker, [fluidd / Mainsail], MobileRaker!!! - Entware, KAMP, CamControl Mainsail webui will be: Printer-IP with 4409 port

_______________________________________________________________ 💡my Creality K1 WEBCAM didn't work initially with the Mainsail Webui, I had to modify the URLs in Webcam settings of Mainsail: URL Stream: http://192.168.1.74:8080/?action=stream URL Snapshot: http://192.168.1.74:8080/?action=snapshot (of course you need to change the IP Adresse to your PRINTERs IP)

_______________________________________________________________ 💡MobileRaker - printer remote control outside of your HOME Lan: ✅ install the MobileRaker App ✅ create an OctoEverywhere account (free) ✅ activate OctoEverywhere service on your printer (in Linux prompt) cd /usr/data/ git clone https://github.com/QuinnDamerell/OctoPrint-OctoEverywhere octoeverywhere cd octoeverywhere sh install.sh

_______________________________________________________________ 💡check the inputshaper Fix: At least in previous firmwares their code for the input shaper tuning was not correct: it tested both axis - but only used one value on both ;) (but dont use mine - they will be different on each printer!)

_______________________________________________________________ 💡0.6mm nozzle the better choice over all! (+speed +durabilbity -fine details) ✅ change the nozzle 🎥 https://youtu.be/6BkPz5lPr8M to 0.6mm!!! ✅ use "Arachne" mode on slicer! (default on orca slicer) 🎥 https://www.youtube.com/watch?v=WgXM2zPusXo - Mpox: 0.6mm nozzle: 0.34mm Layerheight, 0.66mm linewidth - Brass vs Steele: steele 0.4mm needs 10c more temp for same layer adhesion! Wood filament: use 0.6mm brass nozzle 🎥 https://youtu.be/bXEM-TVVA0k?si=F2MJI1MMHMqvnk8w _______________________________________________________________ Videos, LINKS and docs: https://github.com/CrealityOfficial/K1_Series_Annex https://github.com/CrealityOfficial/K1_Series_Annex/blob/main/root%20guide/K1%20Series%20root%20guide.pdf Mainsail installation - very good video guide: 🎥https://www.youtube.com/watch?v=s1Os-_35eRQ Improve a lot of things: 🎥 https://youtu.be/nAKbcni6vlw?si=zvoPkTTyaNL88VBV 🎥 https://youtu.be/MXwsjaLzxnI?si=mujNtcKYjYMZNLFl

📋Updated review on ALL3DP