►or at Geekbuying (use CODE ⭐NNNDEK1M⭐ for 665€!!!
►and TomTop
I deliver honest opinions, well researched and tested (sometimes "almost scientific" ;) reviews! If you can support this idea please check my PATREON 🙏
📋 Infos (covered in this test):
Many components shared with k1
+ LARGER buildplate!
+ Lidar
+ spare hotend and nozzle
+ Glass top lid
+ filament sensor inside
🐳Orca Wifi print only with rooted Klipper
- but device tab can show crealitys gui
- upload and print over that if one doesn't wanna root and update!
Tip: You have to HOME all axis before you can start printing this way
Error msg: "please return to the printer..."
really means "home the printer axis"
- came with pretty old firmware (1.3.0.39 from July/2023) and said this is the most current?
- used USB Stick and downloaded firmware 1.3.3.8 (March/24) from here
- enabled root access in settings (on printer LCD)
- only after you update to the most current firmware, you can have root access: user: root pwd: creality_2023
or in short (once connected via SSH to your printer, run these 2 commands):
1. Download the HELPER script:
git clone https://github.com/Guilouz/Creality-Helper-Script.git /usr/data/helper-script
2. RUN the script:
sh /usr/data/helper-script/helper.sh
(and here just install the essentials + maybe OctoEverywhere)
if you need to roll back to ORIGINAL Firmware
some more tips 💡:
✅ df -h to check used diskspace...
✅ go thru this for correct date/time
✅ download Timelapses via the net:
(use WinSCP proggy and user: root / pwd: creality_2023 to logon)
copy files from here: /usr/data/creality/userdata/delay_image/video
✅Make sure your K1max Bed is LEVEL!
heat up the bed to your normal print temp
let it measure the auto bed mesh (lcd, or gui)
not the difference and try to counteract them with those "washers"
🌐▬▬▬▬LINKS▬▬▬▬▬▬▬▬▬▬▬▬▬▬🌐
►Creality K1max: https://shrsl.com/4ifxf
►Geekbuying: https://www.geekbuying.com/go/8duqdpRl use CODE: NNNDEK1M for 665€!!!
►Manual level WASHERS: https://www.printables.com/de/model/681528-bed-shims-fits-creality-k1-and-k1-max
►Creality firmware: https://www.creality.com/pages/download-k1-max-flagship
►ROOTING guide here: https://guilouz.github.io/Creality-K1-Series/helper-script/helper-script-installation/
🔖▬▬▬VIDEO INDEX▬▬▬▬▬▬▬▬▬▬▬🔖
00:00 Intro
01:19 unboxing
02:54 K1 vs K1max
03:28 closer look on the K1max and first steps
04:43 Filament changes
05:17 manually leveling with printed washers
07:18 K1max firmware update with USB stick
08:25 installing MOONRAKER
11:53 Root or not? Orca Wifi printing
12:55 TEST PRINTS
15:27 side spool holder
16:52 AI Scan with LIDAR
17:22 TPU
18:47 ABS Skateboard wallmount
19:43 Birdfeeder dish
20:52 final mods
●▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬●
#Creality #K1max #3dprinter
