ATOMRC Dolphin - not just another review :)

See why everyone is crazy about this now RTF plane, the revised Dolphin from AtomRC, with INAV6 and DJI o3 on it.

Thanks AtomRC for supplying this unit here for the review!

Massive thanks to TJ for helping me with the external shots (don't miss that part starting at 10:22!!!!) check out his channel:  @dynashot1  I create HONEST reviews! If you can support this please check my PATREON Build was quick and easy! - servos, linkages, motor, ESC, FC and GPS were already installed - Wings and vtail needed to be glued on - prepared DJI O3 cable (long with plug for FC was supplied, other end open cables) - connect CRSF RX (on UART 2!) - printed a custom O3 lensmount for the little cutout just behind the nose - make sure o3 has enough cooling! Don't use rocksteady as this makes o3 hotter? - created a little air scoop to help the airflow - installed a heatsink on the O3 (25x25mm) - Tip/correction: bending the cable like I did with the CRSF antenna is not recommended! TECH SPECS: Wingspan:    845mm(33.2") Length:         710mm(28") Weight:         520gr with dji o3 Motor:          2306 1700kv ESC:          30A with 5V/3A BEC seems to be strong enough to supply DJI O3 Servo: 2pcs 9g servo Props:         6~7 inch, incl. 70x40 (cw and ccw) Batteries: 4s 1500-2200mah LIPO or 4sLiIon 3000 or 4000mah good cells (30-40amps) CG on the "nobs" works fine, maybe use a slight bit forward FC has barometer!

F405 Flightcontrol

SOFTWARE - INAV 6: "horizon hawk" it had INAV 5.1 preinstalled, with basic settings if INAV configurator (use the correct version!) doesn't connect, use the ImpulseRC Driver fixer. It's still a valid tool - and GOLDEN! INAV 6.RC3 (as of 11.3.2023) firmware target: ATOMRCF405NAVI CRSF: UART2 GPS: UART4 DJI: UART5 all SETTINGS are here: http://bit.ly/3Fpu8zu ______________________________________________________ ESC: ATOMRC BLS 30A (input: 2~4S Lipo) Continuous current: 30A / Max Current: 35A Output: Built in 5V 3A BEC ESC doesnt need calibration if you use DSHot 600 Set motor brake with BLHeliS config! (or reverse motor direction if you want to use other prop) ●▬▬▬LINKS▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬● F405 Flightcontrol

3d printed Things: my modified, simple DJI O3 cammount and airscoop ESC cooling lid Another air scoop many Dolphin parts div. nose parts air unit nose mount Nose for Insta360 Go 2 Motormount simple Cammount Burzl's PanTiltmount, Cable management

DO YOU WANT TO SEE MORE??? ►TOP Videos ►Mountain DIVES ►Product REVIEWS ●▬▬▬EQUIPMENT▬▬▬▬▬▬▬▬▬▬▬▬▬●

Filmed with: Sony A7c, Samsung Galaxy S10, edited with Premiere Pro air2air shots supplied by my friend Thorsten, check out his channel or book him for pro work:  @dynashot1 

●▬▬▬♫MUSIC▬▬▬▬▬▬▬▬▬▬▬▬▬▬● Music: Exits - Felix Johansson Carne I use EPIDEMIC SOUND, get your account here (affiliate): https://bit.ly/3p6OGE0 ╔═╦╗╔╦╗╔═╦═╦╦╦╦╗╔═╗ ║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣ → http://goo.gl/szFJv ╠╗║╚╝║║╠╗║╚╣║║║║║═╣ (best way to support me!) ╚═╩══╩═╩═╩═╩╝╚╩═╩═╝ (¯`·.¸¸.·´¯`·.¸¸.-RCSchim-.¸¸.·´¯`·.¸¸.·´¯) ► Discord Server ► RCSchim@gmx.at ► https://www.FACEBOOK.com/RcSchim ► https://www.PATREON.com/RCSchim ► https://TWITTER.com/RCSchim ► https://www.INSTAgram.com/rcschim ●▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬●

What better place than this for a drone?

Had this spot on my list for long now and this day (late July) was perfect for a session with my chimera 7. Since my Gopro10 was quite new I needed some confidence by scouting with 2 smaller packs there. From my current perspective (fixedwing mania) I'd love to go there again with 2 or 3 FPV plane wingmen and do epic FPV chase session there! Greets, Mario

DO YOU WANT TO SEE MORE??? ►TOP Videos ►Mountain DIVES ►Product REVIEWS please check my PATREON

●▬▬▬EQUIPMENT▬▬▬▬▬▬▬▬▬▬▬▬▬● Filmed with: Sony A7c, Samsung Galaxy S10, Gopro10 edited with Premiere Pro ●▬▬▬♫MUSIC▬▬▬▬▬▬▬▬▬▬▬▬▬▬● Lost Crusaders - Hampus Naeselius Castles in the Sky - Across The Great Valley Imminent End - Christoffer Moe Ditlevsen

I use EPIDEMIC SOUND, get your account here (affiliate): https://bit.ly/3p6OGE0

╔═╦╗╔╦╗╔═╦═╦╦╦╦╗╔═╗ ║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣ → http://goo.gl/szFJv ╠╗║╚╝║║╠╗║╚╣║║║║║═╣ (best way to support me!) ╚═╩══╩═╩═╩═╩╝╚╩═╩═╝ (¯`·.¸¸.·´¯`·.¸¸.-RCSchim-.¸¸.·´¯`·.¸¸.·´¯) ► Discord Server ► RCSchim@gmx.at ► https://www.FACEBOOK.com/RcSchim ► https://www.PATREON.com/RCSchim ► https://TWITTER.com/RCSchim ► https://www.INSTAgram.com/rcschim ●▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬●

Runcam Split HD Review

Contents of my review (use chapters!): Installation (not so easy), Latency (high) choppy live video quality, 2.7k video quality samples (with trick for optimal quality) Weight: 20gr (-10gr for other DJI cam, +5gr for 5vBEC) = 15gr Live-feed: - high latency (62ms avg) - choppy since 11% of the frames are dropped (and doubled) Power: had to install a BEC (my FC was too small) Box-contents: ND16 Filter! screws, cables

I'm your guy for HONEST reviews and opinions! If you wanna support this rare idea please check my PATREON: https://bit.ly/2ESMtIO ●▬▬▬LINKS▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬● ►►Runcam SplitHD: https://bit.ly/3EAVZJN Latency XLS download: https://bit.ly/3qvIgPc

DJI FPV Kaiju Antennareview

Kaiju: a giant monster of a type featured in Japanese fantasy (Gozilla is a type kaiju).

Buy the Kaiju here: https://bit.ly/3wH529I (no affiliate link!)

Claim: 9.63mi / 15.4km Gain: 9dBi @ 5.8 6.5Dbi @ 2.4 Pol: linear, vertical Horiz. Beam: 5.8: 55° 2.4:75° Vert.Beam: 5.8: 65° 2.4:70° Tested over 30 times out in the desert by flying different designs! Each antenna is hand made. When ordering don't forget to specify the Pilot's name to be engraved. ------------------------- ORT: DigieyesV2: 11dBi 2.4/5.8 ? Horiz: 110° V:75° Review: https://youtu.be/sGScGJl7DUc I DONT earn money with affiliate links - I'm not a sales guy, here you get HONEST reviews and opinions. If you wanna support me: 👍, sub, 🔔, watch, share or even become a PATRON: https://bit.ly/2ESMtIO (there's early access and behind the scenes stuff over there!) ●▬▬▬LINKS▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬● ►Test data as XLSx, Script download: https://bit.ly/3n9eb7M ORT Digieyes2 Review: https://youtu.be/sGScGJl7DUc SRT tutorial: https://youtu.be/03E2iRZeT0k MadsTech review: https://www.youtube.com/watch?v=AzsFAF5peFU

Very enjoyable spot, perfect trees! (relaxed commented fpv)

When I take my motorbike to work (which is only 1.5km) I have to make a little detour. If I roam around there, I take a drone with me... you see where this leads (late at work but with a smile on my face! ;)

2 Videos from there: https://youtu.be/oz-XrLqQGwQ https://youtu.be/3czYPzWWJz4 (I flew there with the ImmersionRC Vortex250 and later with then Mojo)

Very relaxing morning exploration flight!

A sub 250gr drone (GepRC Smart35) is allowed to fly almost everywhere! With this freedom I had a few really good flights on this morning (early summer), and since I used the instaSMO4k I got decent footage out of it:

I use 2.7k 30fps for 2 reasons: 1. my instaSMO4k shuts down mid-flight often when in 4k mode 2. youtube dedicates a good ammount of MBit for 1440p30 videos - and they are sufficient high res imho 2.7k60fps would crop in too much (limitation of camera) 30fps in combination with an ND filter works really nice for cinematic stuff. 4:3 raw resolution is great for stabilization (which in my case works directly thru the insta360 studio premiere plugin). FAKE SUPERVIEW tips: Premiere Settings for 4:3 to 16:9 "fake superview": source video: scale of 50% Adjustment layer: Effect "transform 4:3": scale 143% Effect "Lens distortion removal - gopro - hero 4 session - 1080 superview" Curvature: -46 (play around with this)

Longrange Cruiser - Rekon 6 (Review, analog to DJI conversion, Testflights, ND Filter,...)

I was curious if this copter would perform better than the iFlight Chimera5.

I still guess that the Chimera7 would be a better choice for the ultimate mountain surfing copter, but this one is actually quite good and will be my main quad from now on. Banggood supplied this copter for review, but I could only get the analog version and converted it to DJI immediatley. I chose the STOCK DJI cam on purpose - from my experience they are the least susceptible to jello. Had I chosen the POLAR - it would be really hard to get rid of jello! I DONT earn money with affiliate links - I'm not a sales guy, here you get HONEST reviews and opinions. If you wanna support me: 👍, sub, 🔔, watch, share or even become a PATRON: https://bit.ly/2ESMtIO (there's early access and behind the scenes stuff over there!) INFOS: Flighttimes: cruising with 6-7 amps average with 200gr battery (~470gr AUW) ~23mins with 3000mah 4S LiIon ~13mins with 1800mah 4S LiPo maybe ~30mins with 5000mah 21700 LiIon cells AMP calibration (for me): new scale = 460 VOLT: 111 my PID tune: (with ~ 470gr of AUW) and I tried to tune away the "shakiness" when the air is gusty: Axis P I D F ROLL 47 50 40 90 PITCH 52 55 40 95 YAW 45 70 0 90 ●▬▬▬LINKS▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬● Rekon6 drone : https://bit.ly/3kTUPB0

Runcam Mipi or Caddx Polar?

Mipi is definitly faster (in photography terms - fast shutterspeed, less motion blur) while Polar gives the overall nicer and smoother image! See the full review to decide which cam you like more! I'm not so sure if many users will like the Polar on RTF Freestyle quads tho (looks like new quads now rely on Polar/Mipi since they're the only option with stock :)

While filming this I could definitly feel the advantage of 120fps (DJI cam) for freestyle flying!

All flight scenes in the beginning were after sunset and they are in order of filming. So it was of course getting darker but I flew them back to back with little time delay. It's a difference like day and night ;) Yet they share a lot of common properties: 60fps HQ mode only, no cam options to be set (except with solder on joystick...) 16:9 only (but with wider FOV than DJI stock) Small, cheap, AVAILABLE - better than Nebula (except their Pro version).

●▬▬▬LINKS▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬● Runcam Mipi: https://bit.ly/3in4MqF Caddx Polar: https://bit.ly/3xh1SYR my Caddx Polar Review: https://youtu.be/mDiGO08vtDE good comparisons from Gal Kremer: https://youtu.be/-VaeI_2HW7w

was Bardwell wrong? Caddx Polar Review & Latency tested

Is this Lowlight DJI FPV cam from Caddx to slow? Is the latency unflyable? How dark of a night can you actually fly? These questions and a few more will find answers in this video ;) Thanks Caddx for sending me this review sample! Make sure to comment (with the right password) and maybe win one of 2 Caddx Polar cams!

●▬▬▬LINKS▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬● Bardwells Video: https://youtu.be/JJGFEKTFyUQ Caddx Webshop: https://bit.ly/3xh1SYR

3.5" is my new freestyle favorite! GepRC Smart35 Review

GepRC directly sent me this drone for a review and after first flights it was clear to me that I would fly this much more than the usual few flights for a review. Since I didn't feel pressure I could collect enough flights to give you a serious compilation of different spots and thoroughly test this copter. With those small sub250 drones (but flying like a 5" freestyler) you have access to much more spots than with the usual 6S 5" beast which screams through the whole city ;)

I DONT earn money with affiliate links - I'm not a sales guy, here you get HONEST reviews and opinions. If you wanna support me: 👍, sub, 🔔, watch, share or even become a PATRON: https://bit.ly/2ESMtIO (there's early access and behind the scenes stuff over there!)

►GepRC Smart35 copter: https://bit.ly/3xMqd9w ►►additional, uncut & commented flights: https://youtu.be/q5go8Z-_32I Book: FPV Flight Dynamics by Christian Mollica https://amzn.to/35DhKtr HQ Props (if you dont find the Emax Avan Scimitar): HQ 3bladed T3.5X2X3 HQP0760625796350 https://bit.ly/3qbECtq Rimzler Smart35 review: https://youtu.be/QwW7VLg7gN0

O.R.T. Digieyes V2 - DJI FPV dualband Patch antennas

Eko from ORT sent me these antennas SPECIFICALLY created for the DJI FPV drone. Since the V2 goggles and the DJI FPV drone use Occusync3 and here two frequency bands (2.4GHz and 5.8GHz) you need to take care which antennas you use (if you want to move away from the stock stubbies). On V1 DJI we could just use any 5.8GHz antennas (from analog times). One reason to move to such directional aftermarket antennas would be the very limited poweroutput in CE mode. Skip to my conclusion to see the results of my 5 testflights - or get some popcorn and enjoy the show ;)

https://www.instagram.com/oldradiotransmission

►Test setup: fly over field, fixed alt 50m - turn around on 2km distance (or if video get's too bad) use 2.4GHz 40MHz mode manual (WIFI shouldnt be issue there) Test1: FCC mode + stock ant (baseline) Test2: FCC mode + dualband patches bottom, stock top Test3: CE mode + Stock Test4: CE mode + dualband patches bottom, stock top Test5: CE mode 5.8 + dualband patches bottom, stock top (is there a difference if I go from 2.4 to 5.8GHz?) ►ORT Digieyes V2 Specs: 11dBi dualband 2.4/5.8 H: 110° V: 75° beam width 10° H offset & 7° V offset each panel Working Frequency : 2350-2500 MHz & 5600-6000 MHz Gain (dBi) : 11dBi SWR/S11 : less than 1:1.5 at both working frequency Polarization : Linear Polarization (match with DJI Drone default linear antenna) Connector : RP-SMA with rg316 cables (fits to DJI Goggles V1 & V2) Antenna dimensions : 15.5cm(length), 7.5cm(width) & 1.8cm (thick) Weight : 82 g

Scenic Mountain mission (Schneeberg & Chimera5)

After a little hike (on purpose ;) I flew one pack there. Was quite exciting even if I know now that my gear is pretty trusty. Been there in the past, but never had a proper copter to go up all the way. Spent quite some time searching for a nice way to use both: DJI Srt (bitrate) and Tango2 Telemetry Logs for the overlay. If you guys are curious about this workflow - I could do a tutorial... Wonderful location (Scheeberg, Scheebergdörfl) Thanks to the cam-lady for capturing the ext. scenes!

Also check out these tasty DIVES: https://youtu.be/lxfakLKu8xw (flown by Scott: same region, bit earlier this year when there was more snow - and Gopro6+Reelsteady)

●▬▬▬EQUIPMENT▬▬▬▬▬▬▬▬▬▬▬▬▬● Copter: iFlight Chimera5 with DJI FPV https://youtu.be/2JJUSVGgwbg Remote: TBS Tango2 (v3 board, dyn power) https://youtu.be/2U7QBl8VSQQ Goggles: DJI FPV v1 + Henrik's 3turn Helicals https://youtu.be/1BrBAZeicZ8 Battery: GepRC 3000mah 4s LiIon pack

WORLDS FASTEST USB RF Spectrum Analyzer - Aaronia Spectran V6 RSA500x

Aaronia Spectran V6 RSA500x RF analyzer:

• extremly low POI (probability of intercept, how short of an RF signal spike can the device "see") 97ns (FFT-based) 10ns (I/Q-based)
• fast sweep speed: over 500GHz/s, it can sweep 6 GHz in less than 10ms
• RTBW (realtime bandwidth) 120MHz! (can be unlocked to 245MHz)
• Range: 10 MHz to 6 GHz
• Dimensions: 210 x 115 x 30 mm, 860gr weight
• powerbank in same formfactor with 26Ah
• for mobile use: powerfull laptop! (or reduced fps) larger Powerbank (needs to supply enough WATTS!) or only 120MHz scan rate with one USB 3.2g2

●▬▬▬LINKS▬&▬INFOS▬▬▬▬▬▬▬▬▬▬● PRODUCT Link: https://bit.ly/2T14qM4 my ►DOWNLOADS: https://bit.ly/3uRn5rc (Profiles, custom Missions, Links) https://aaronia.de/downloads/ https://aaronia.de/grundlagen/oesterreich-gsm-umts/ great FPV Frequncy overview from Michael Niggel PROFILES: Find (and backup) the Frequency profiles here: C:\Program Files\Aaronia AG\Aaronia RTSA-Suite PRO\cdata\profiles and move the profiles I supply ( https://bit.ly/3uRn5rc ) into there. Profiles are loaded on program start (if you change something in these XML files, restart the program! They are sometimes "connected" or nested together. If the parent is missing you wont see a child profile! Profile "Labels" are only visible below a spectrum if in spectrum settings the option "accept profiles" is active! It's better to choose the profiles in "Config" of Spectrum rather than with the Ribbon button... BASIC RF spectrum knowledge:

• RBW (bandwidth - how accurate do I look at RF?) lower is better (more accurate) but slower sweep
• VBW (video filter - low (100khz) filters MUCH, FULL settings means highest detail!) higher is better (less smoothing) but you see more noise (set to low if you only wanna see powerfull signals clean)

Ride&Fly S02E01: Rocks, Trains and Mountains (Rax, Kreutzberg)

Had a day off and finally could take out the bike for a scenic ride. 3 stops, Dji drone worked really nice here!

DJI FPV: ND Filters vs Jello

While this drone doesn't satisfy everybody (especially since it has been overhyped) it's still a pretty good fast flying action cam. Only if you fly slow, or in certain extreme situations you get ugly vibrations that cause wobbly, jello issue in your footage.

►Freewellgear NDFilters (they sent me the filters for free)

If you compare DVR (unstabilized) footage vs. Rocksteady stabilized footage from the drone - you see how good the stabilization works - but it's not a magic tool that eliminates all the shakes (like Gopro hypersmooth?). So if we help a bit by reducing the ammount of light on the sensor, the shuttertimes can be longer (1/120 is my suggestion). BUT: you shouldn't stay on AUTO exposure, because the cam tries to increase ISO to get enough light. Well maybe you can stay on auto if you chose the right ND filter for your current daylight situation. You can see this in the camera settings, it actually tells you the EV (exposure value) in manual mode. EV should be 0 or maybe -0.3 while ISO is on 100 (you see in my video that I had to use the ND8). Hope this helps you capture even better footage with this drone, happy flying (and filming), Mario

Surprising results! DJI Goggles Antenna tested 2.3km away (stationary!)

1st Test up there: https://youtu.be/RQML-azG4bQ 

Last week I did a practical flying test with the same antennas: https://youtu.be/8TYY1-3Lo_c 

These are the DJI goggles V2 antennas: https://youtu.be/FsKhaigxpJs 

I also tested the ORT Digieyes (which are quite similar to the ChrystalHDs): https://youtu.be/PvSZYhobc24

●▬▬▬LINKS▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬● ►VAS Cyclops V2 https://bit.ly/3rW71Tj Gain: 10.25dbi, Beam width: 120 degrees -3db point: 60 degrees Price: 90$ Vas Cyclops V2 = 4x Crosshair XTreme: https://www.youtube.com/watch?v=B6C4_GPVk7k should be good at sending the signal through the woods furthest (TEST idea: fly thru as much wood distance with Bumblebee) ►VAS Victory Stubby https://bit.ly/3fMnl6O Gain: 1.9dbic, Axial ratio: 0.96, Weight: 3.5 grams, Price: 80$ (20$x4) ►TrueRC Stubbies were provided by germany based Shop FPV24.de: https://bit.ly/33MsV2I Gain: 1.9dbic, SWR: below 1.5:1, weight: 3.7 g, Price: 90$ ►iFlight Crystal LHCP Short Omni Antennas: https://bit.ly/39EvKWb Gain: 3Dbi, Axial Ratio: 0.7, weight: 4.2g/pc, SWR: below 1.5 (ON 5.8GHz) Price: 28$ (2x14$) for 4x omnies ►iFlight Crystal HD Patch https://bit.ly/39K2cqa Gain: 9 dBi, Axial ratio: below 1.6, Beam Width: 105° H. 75° V. , Weight: 52.1g price: 44,99$ ►HENRIK's "Death Ray" 3 turn Helicals To order or for questions, please email: henrikjaderstrom84@gmail.com Gain: 9.5 dBm Total beam width: 174 degrees -3 dBm beam width: 100 degrees Tower offset angle: 40 degrees Price incl shipping: 106 USD

VAS Cyclops V2 vs Helicals vs iFlight Chrystal (Hexplorer)

ad a very nice early spring evening (finally longer days!) and first a great longrange flight, then enough batteries to test some DJI antennas for you. See how the VAS CYCLOPS V2 perform against iFlight ChrystalHD and Henriks Deathray Helicals... If you don't like this "realworld" testing approach, skip it and wait for the next test (which will be the stationary 2.3km distance test again.

►VAS Cyclops V2 https://bit.ly/3rW71Tj Gain: 10.25dbi Beam width: 120 degrees -3db point: 60 degrees Price: 90$ ►VAS Victory Stubby https://bit.ly/3fMnl6O Gain: 1.9dbic Axial ratio: 0.96 Weight: 3.5 grams Price: 80$ (20$x4) ►TrueRC Stubbies were provided by germany based Shop FPV24.de: https://bit.ly/33MsV2I Gain: 1.9dbic SWR: below 1.5:1 weight: 3.7 g Price: 90$ ►iFlight Crystal LHCP Short Omni Antennas: https://bit.ly/39EvKWb Gain: 3Dbi Axial Ratio: 0.7 Weight: 4.2g/pc SWR: below 1.5 (ON 5.8GHz) Price: 28$ (2x14$) for 4x omnies ►iFlight Crystal HD Patch https://bit.ly/39K2cqa Gain: 9 dBi Axial ratio: below 1.6 Beam Width: 105° H. 75° V. Weight: 52.1g price: 44,99$ ►HENRIK's "Death Ray" 3 turn Helicals To order or for questions, please email: henrikjaderstrom84@gmail.com Gain: 9.5 dBm Total beam width: 174 degrees -3 dBm beam width: 100 degrees Tower offset angle: 40 degrees Price incl shipping: 106 USD

Flywoo HEXPlorer - Review and many Testflights

I really enjoy flying this copter. The additional power costs you some flighttime - but gives you more stability and more options (carry a fullsize gopro, large batteries, more YAW stability...).

Martin: thanks for the Mavic shots - great job once again!

●▬▬▬LINKS▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬● Flywoo-HEXplorer: https://ban.ggood.vip/XkTZ (code: BGRCLR4, $15off) Banggood Spring New Arrivals: https://ban.ggood.vip/XkTY

GepRC Mark4 Review (many Flights)

A well built 6S 5" drone for 240$ - unboxed professionally, testflown, converted to Caddx DJI HD, even did a full blown mountain dive with it on my first flights :)

A well built 6S 5" drone for 240$ - unboxed professionally, testflown, converted to Caddx DJI HD, even did a full blown mountain dive with it on my first flights :) Please 👍 and 🔔 thanks ;-) it helps a lot! Find many links and infos further down! I DONT earn money with affiliate links - I'm not a sales guy, here you get HONEST reviews and opinions. If you wanna support me, watch, share or even become a patron: https://bit.ly/2ESMtIO THANKS: to Anita for filming, Clemens for flying very predictable with his Sailplan, Markus for intentionally crashing for dramatic chase footage and Martin for the nice Mavic Air2Air shots! ...and Banggood for sending the review sample! GEPRC Mark4 6S: https://ban.ggood.vip/Xgfu

How I flew 25mins with my 5" Drone!

How do different LiIon Packs work on different copters, how are they effected by cold temps and much more in this video ;) DJI FPV flights with iFlight Chimera4 and HGLRC Sector5 in the Winter.

●▬▬▬Details▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬● Copter / LiIon | Endvolts | EndV / cell | mah used | Flighttime | Battery in plastic bag? 1st Day (5°C) Chimera4 3S 3500 6,1 | 2,0 | 1998 | 00:13:51 | no Chimera4 4S 3500 11,1 | 2,8 | 1851 | 00:14:02 | no Sector5 4S 7000mah 11,1 | 2,8 | 5951 | 00:24:47 | yes 2nd Day (9°C) % more mah than in cold temp Chimera4 3S 3500 9,1 | 3,0 | 2880 | 31% | 00:18:00 | yes Chimera4 4S 3500 12,5 | 3,1 | 3150 | 41% | 00:17:36 | yes ●▬▬▬LINKS▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬● LiIon Packs used: ZOHD LIONPACK 3S1P 18650 11.1V 3500m http://bit.ly/3dto23Z ZOHD LIONPACK 14.8V 4S1P 3500mAh http://bit.ly/37tFr8T ZOHD LIONPACK 4S2P 18650 14.8V 7000mAh http://bit.ly/37xaWil ZOHD LIONPACK MAX. 4S1P 21700 5000mAh http://bit.ly/3aF6IqZ