Tuesday, July 28, 2020

CADDX Loris "4k60", Ratel, Nebula analog Latency, Image quality and a BUZZARD!

If you're here for the Buzzard, check 11:46 ;) - in my Caddx Cam-Review I didnt compare the digital image vs. stock DJI, because we already know it doesnt look good. I measured the analog latency and give you an idea of the 4k60 quality you can expect from the 10gr Loris board cam.


Find the cams here

Sunday, July 26, 2020

DJIFPV Summer Riverruns (scary as s.... to fly that close and fast over water)

Found the confidence to fly more over our river "Schwarza" (Black river) on 5 different spots around here. Of course you need to powerloop that bridges - but throttle response should be trained to catch the copter before it's his last DIVE ;)
Hope this helps you cool down if it's hot, and hope it brings light, sunshine and warmth to you if you are down there in the winter!
Greets, Mario


Filmed with: Emax HawkPro + Caddx Vista (DJI FPV)
used ND Filter (lens thickend with tape)
Superview script

Tuesday, July 21, 2020

DVR Chronicles Part2 (Emax HawkPro Caddx Vista)

Since the beginning, this little Emax HawkPro power quad really delivers!
Please support with 👍 and 🔔 thanks ;-) it helps a lot!
Because it's small but powerfull and a gopro wouldnt fit easy (and make it heavier) my "DVR chronicles" series was born. Still got loads of great flights which I will keep combining to such FPV vids. I dont wanna fall behind too much with using these flights (older footage tends to be forgotten in my collection). Next will have more commentary - curious how you like this approach.
thanks for watching and commenting,
Greets, Mario


Part 1:

Emax HawkPro Review:



Wednesday, July 15, 2020

DJI FPV: 50mbit Mode (how it looks on the RF spectrum!)

See the new 50mbit mode on a spectrum analyzer:

DJI FPV Channels overview:
25mbit mode:
CH1 5650-5670 CH5 5795-5815
CH2 5685-5705 CH6 5868-5888
CH3 5725-5745 CH7 5904-5924
CH4 5760-5780 CH8 5829-5849

50mbit mode:
CH1 5680-5715 35mhz
CH2 5755-5790 35mhz
CH3 5860-5895 35mhz

...and here you see me updating my DJI Airunits (Hangar VLog)

Thursday, July 9, 2020

Tutorial: SUPERVIEW with NIEK Script - the SUPER EASY way

Wanna get the cool, fisheyed look that most freestylers achieve with gopros Superview? Check this free little converter which can even convert a bunch of files at once. Super easy! No settings no fiddeling around with options, just run a script.
1.) download this NIEK SUPERVIEW Script
and extract all 3 *.EXE files into your SYSTEM32 folder (i.E. c:\windows\system32)
If this scares you - it also works to have this *.exe files in the same folder as your videos - they just have to be available for the BAT script...

 2.) copy the "Superview all.bat" File to the folder where you have your 4:3 source Videos 

3.) run this file and either enter a single videos filename when asked - or easier, just hit ENTER to have all MP4 files from this folder converted automatically into a "superview" subfolder. 
 Tip: Depending on your OS' paranoia mode (aka security settings) you might need to start the script as admin, or even have to lower "user account control" bar to lowest settings. 

 I've also compared a few other methods to convert 4:3 video to 16:9 with old GoproStudio, MeshWarp filter on Vegas and then I compared results:
   

Alternatives: InDrone Productions showed me this -> MeeKaah Superviou:
  • nice proggy with drag and drop rather then command line
  • available for MAC as well
  • can upscale to 4k if needed
  • speed, filesize same as NIEK
  • I miss batch conversion option (more than one video)