STEEP OFFROAD TRAILS - Ausom L2 Max Dualmotor Scooter 🛴

 Got the chance to try this DUAL MOTOR BEAST from AUSOM, which is one of the best value scooters I tested so far. For heavy riders the 2ND MOTOR is a must! Such scooters are normally priced over 1000€ - this one is considerably cheaper! Find out if they had to save on functionality or cheap out on components to achieve this lower price!

Get the scooter 🛴 here if you're convinced: 🛒(Affiliate link) use "RCS30": Coupon Code for 30€ off!!!!

📋▬▬▬▬▬▬▬▬TECH SPECS▬▬▬▬▬▬▬▬📋
          WEIGHT: 33 kg
💪💪POWER: 2x 1000w motors (2x 1250w peak! 2.5kw = 3.4hp!)
            SPEED: Max Speed (Wheel in the air): 75 kph 
                          with 90 kg rider, around 60-65 kph
      → RANGE: 50-60 km on normal, flat roads
                           First charge after 25 km (2/3 heavy offroad hillclimbing with heavy rider)
                           700 Wh charged (~ 35 km heavy use - which is good)
  🔋BATTERY:  48v / 20,8 Ah / 1000 Wh   
                           Charges 14 hrs (0-100) or 7 hrs with two chargers (2nd not included)

💡 "Hidden" P-Menu:
P codes (settings in "hidden" menu - longpress [+] and [-] to enter)
P02: km(0) or miles(1), def=0
P04: Sleeptime (0-60min), def=5
P08: Speedlimit in % (5-100), def=100 
P09: Zero start(0), or "push to start"(1), def=1
P11:  Electric brake level, 1 to 5 (soft to hard), def=3
P12: Acceleration level, 1 to 5 (soft to hard), def=3
P17: Cruise control (0=off, 1=on)  (hold the same throttle pos for 7 sec to activate)
P18: NFC cards: Bind (longpress [+] ) or unbind (longpress [-] )   if "B" is visible, hold up new card on top of display
P19: Display Backlight (1-3, 3 strongest=default)
P23: Password change:
Enter old password first (new scooter = 0000) then new one.
To enter password: + or - to select number, Power to set and advance
after all 4 digits are set, press POWER for 2 sec till "S23" appears

Default code: 0000
Use phone NFC:  (only with IOS, Android currently not possible?)
https://youtu.be/3W6jLaQiNWQ?si=vealHHBdmfziH1X0
My Philosophy: Honest, "almost scientific" testing, I test products rigorously and share honest opinions—even if it costs me affiliate earnings. Using my affiliate links supports my work at no extra cost to you! Huge thanks!🙏 

🌐▬▬▬▬LINKS▬▬▬▬▬▬▬▬▬▬▬▬▬▬🌐
https://www.ausomstore.eu/?ref=RCS
https://www.ausomstore.eu/de/products/ausom-l2-max-dual-motor-e-scooter?ref=RCS

🎥▬▬▬EQUIPMENT▬▬▬▬▬▬▬▬▬▬▬▬🎥
my Hangar: http://goo.gl/QNzck
Filmed with:  DJI Mic2, Oneplus 12, edited with Premiere Pro

♫▬▬▬▬MUSIC▬▬▬▬▬▬▬▬▬▬▬▬▬▬♫
Shangri-La - BASIXX
Can't wait no more - JOHAN GLOSSNER
I use EPIDEMIC SOUND, check their nice tracks here: https://bit.ly/3p6OGE0

...how to make the ultimate longrange DIY pack 🔋(DJIs Magic sauce!)

 Here I show how to build your own longrange lipo battery with exceptional features (large capacity, low weight) and really affordable price while those cells are of good quality (they are used by DJI!). Not sure how long this ALIExpress seller will be able to sell those cells - maybe DJI will stop this at some point? 

My 4cell 3850 mah Packs weigh around 225g! and are good for 30 min flights with my planes or copters. On planes you can easily use 2 or more of these packs for even more flighttime!

Find the CELLS at ALIExpress (but not for Germany...) 
(and make sure to chose the RIGHT size - 3850mah not the 2400 ones!)

Specs:
- charge up to 4.25v
- cut off at 2.8 v (land at 3v under load!)
- continuous 12A are OK, up to 28A possible  (5 sec, use 2P for more demanding copters/planes)

TIPS:
Solder pads: minus pole is easy to TIN (normal solder sticks well here)
+ pole is ALU (with nickle attachment)
Good giude

How Good Is 3DMakerpros MOOSE? (vs Creality RAPTOR)

 

The MOOSE scanner uses blue LED flashes (not laser!) for scanning, featuring AI-powered tracking and alignment. It doesn't require tracking markers—although scanning spray is still necessary for transparent or reflective surfaces. Get your 🫎 Moose here (EU, Affiliate)  or international store Discount Code: ⭐RCS30 for 30€ off!

🔹 Positioning: Ideal as a quick tool for referencing objects in 3D design. It delivers better detail and accuracy than budget NIR-based scanners but falls short of premium laser scanners like the Creality Raptor.

🔹 Creality Raptor Comparison:
- Costs around €1100 (sale) up to €1800 retail
- Offers higher accuracy with laser tech
- Requires tracking points and a powerful GPU
- Best suited for scanning small objects

🖥️ Performance Notes:
- Works best on high-end PCs (e.g., Core i9 285K + RTX 4070Ti)
- Acceptable results even on older laptops
- First test (DolphinPro gimbal canopy) was smooth, though software sometimes stutters and loses AI tracking

🎨 Texture Mode:
- To avoid long processing times, reduce mesh complexity below 100K faces
- Excellent image quality for texture mapping

📦 What’s in the Box (luxury bundle, choose basic bundle to save money as the tripod isn't that great, the turntable not important and you can order a cheap case if you need one)
- Nice carrying case
- Power supply & long USB cable
- USB-powered turntable (no power switch)
- Mini tripod (not super stable)