See why everyone is crazy about this now RTF plane, the revised Dolphin from AtomRC, with INAV6 and DJI o3 on it.
Thanks AtomRC for supplying this unit here for the review!
Massive thanks to TJ for helping me with the external shots (don't miss that part starting at 10:22!!!!) check out his channel:
I create HONEST reviews! If you can support this please check my PATREON
Build was quick and easy!
- servos, linkages, motor, ESC, FC and GPS were already installed
- Wings and vtail needed to be glued on
- prepared DJI O3 cable (long with plug for FC was supplied, other end open cables)
- connect CRSF RX (on UART 2!)
- printed a custom O3 lensmount for the little cutout just behind the nose
- make sure o3 has enough cooling! Don't use rocksteady as this makes o3 hotter?
- created a little air scoop to help the airflow
- installed a heatsink on the O3 (25x25mm)
- Tip/correction: bending the cable like I did with the CRSF antenna is not recommended!
TECH SPECS:
Wingspan: 845mm(33.2")
Length: 710mm(28")
Weight: 520gr with dji o3
Motor: 2306 1700kv
ESC: 30A with 5V/3A BEC seems to be strong enough to supply DJI O3
Servo: 2pcs 9g servo
Props: 6~7 inch, incl. 70x40 (cw and ccw)
Batteries: 4s 1500-2200mah LIPO or 4sLiIon 3000 or 4000mah good cells (30-40amps)
CG on the "nobs" works fine, maybe use a slight bit forward
FC has barometer!
SOFTWARE - INAV 6: "horizon hawk"
it had INAV 5.1 preinstalled, with basic settings
if INAV configurator (use the correct version!) doesn't connect, use the ImpulseRC Driver fixer. It's still a valid tool - and GOLDEN!
INAV 6.RC3 (as of 11.3.2023) firmware target: ATOMRCF405NAVI
CRSF: UART2
GPS: UART4
DJI: UART5
all SETTINGS are here: http://bit.ly/3Fpu8zu
______________________________________________________
ESC: ATOMRC BLS 30A (input: 2~4S Lipo)
Continuous current: 30A / Max Current: 35A
Output: Built in 5V 3A BEC
ESC doesnt need calibration if you use DSHot 600
Set motor brake with BLHeliS config! (or reverse motor direction if you want to use other prop)
●▬▬▬LINKS▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬●
F405 Flightcontrol
3d printed Things:
my modified, simple DJI O3 cammount and airscoop
ESC cooling lid
Another air scoop
many Dolphin parts
div. nose parts
air unit nose mount
Nose for Insta360 Go 2
Motormount
simple Cammount
Burzl's PanTiltmount, Cable management
DO YOU WANT TO SEE MORE???
►TOP Videos
►Mountain DIVES
►Product REVIEWS
●▬▬▬EQUIPMENT▬▬▬▬▬▬▬▬▬▬▬▬▬●
●▬▬▬♫MUSIC▬▬▬▬▬▬▬▬▬▬▬▬▬▬●
Music: Exits - Felix Johansson Carne
I use EPIDEMIC SOUND, get your account here (affiliate): https://bit.ly/3p6OGE0
╔═╦╗╔╦╗╔═╦═╦╦╦╦╗╔═╗
║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣ → http://goo.gl/szFJv
╠╗║╚╝║║╠╗║╚╣║║║║║═╣ (best way to support me!)
╚═╩══╩═╩═╩═╩╝╚╩═╩═╝
(¯`·.¸¸.·´¯`·.¸¸.-RCSchim-.¸¸.·´¯`·.¸¸.·´¯)
► Discord Server
► RCSchim@gmx.at
► https://www.FACEBOOK.com/RcSchim
► https://www.PATREON.com/RCSchim
► https://TWITTER.com/RCSchim
► https://www.INSTAgram.com/rcschim
●▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬●
Filmed with: Sony A7c, Samsung Galaxy S10, edited with Premiere Pro
air2air shots supplied by my friend Thorsten, check out his channel or book him for pro work:
No comments:
Post a Comment