Met an OG FPV pioneer a few times this early summer, showed him the best spots around my area. Ultimatly we converted both our Chimera 7s from old Airunits to DJI O3. Glad I did, because the Chimera 7 is still a very nice platform.Enjoy the scenery, greets and happy flying on the weekend!
DO YOU WANT TO SEE MORE???
►TOP Videos
►Mountain DIVES
►Product REVIEWS
●▬▬▬EQUIPMENT▬▬▬▬▬▬▬▬▬▬▬▬▬●
Filmed with: Chimera7 DJI O3, edited with Premiere Pro
●▬▬▬♫MUSIC▬▬▬▬▬▬▬▬▬▬▬▬▬▬●
Traveler - Wildflowers
Feels like Summer - Staffan Carlen
This was the HIGHLIGHT of the whole Italy-Trip, trying to "summit" the highest peak of this region - the Ortler (3902 m) - once it was Austrians highest peak (prior to 1919 where the Hungarian-Austrian monarchy fell apart).
Weather is always a factor of uncertainity - here we had quite good weather, sunny, no wind, but some clouds. With some luck I found a good spot to start from but look up the Ortler in 3D in google maps - it's a bit hard to fly up there... And it was also really INTIMIDATING to even stand there ;)
So glad how those 2 flights turned out, first one with a LiIon and scouting the area, 2nd flight with more powerful Lipo and taking the risk to got up to the highest peaks.
I still have some more flights from this trip - so stay tuned (or even subscribe if you aren't!).
Greets, Mario
please check my PATREON
DO YOU WANT TO SEE MORE???
►TOP Videos
►Mountain DIVES
►Product REVIEWS●▬▬▬♫MUSIC▬▬▬▬▬▬▬▬▬▬▬▬▬▬●
Cosmic Countdown - Ben Elson
I use EPIDEMIC SOUND, get your account here (affiliate): https://bit.ly/3p6OGE0
╔═╦╗╔╦╗╔═╦═╦╦╦╦╗╔═╗
║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣ → http://goo.gl/szFJv
╠╗║╚╝║║╠╗║╚╣║║║║║═╣ (best way to support me!)
╚═╩══╩═╩═╩═╩╝╚╩═╩═╝
(¯`·.¸¸.·´¯`·.¸¸.-RCSchim-.¸¸.·´¯`·.¸¸.·´¯)
Last week we enjoyed our amazing Italy trip thru South Tyrol / Alto Adige. We visited so many nice spots, mountain roads, passes, highest peak (Ortler) and most impressive curvy road "Stilfser Joch" and I could gather 13 amazing longrange flights with my Chimera 7 - not one glitch or problem. My misses was super supportive while I was amazed and "jaw dropped" behind my DJI Goggles. Yes, I had some face marks after the flights - but it was worth it.
In this video your see 3 of those 13 flights - and this is only the beginning ;) so stay tunend and motivate me to edit more footage soon by THUMBS, SHARE and COMMENT as hard as you can ;)
Greets, Mario
DO YOU WANT TO SEE MORE???
►TOP Videos
►Mountain DIVES
►Product REVIEWS🎥▬▬▬EQUIPMENT▬▬▬▬▬▬▬▬▬▬▬▬🎥
my Hangar: http://goo.gl/QNzck
Filmed with: Chimera 7, DJI O3 (Gyroflow) ND16, edited with Premiere Pro
Control link: Tango2 v3, Crosfire nano RX
DJI Goggles V2 with TrueRC x2air patches
Because of a firend I also converted my own Chimera 7 from "old" DJI Airunit to DJI O3 - and since this I really came back to this great copter. Not the most efficient one (Aura7 is lighter) - but more stable and smooth footy out of it's O3 (the Aura7 still has some micro vibrations)
●▬▬▬♫MUSIC▬▬▬▬▬▬▬▬▬▬▬▬▬▬●
Mountains of Uttarakhand - Aiyo
See if this is the drone for you! It has NO REMOTE. But it also doesn't need one, because AI has taken over ;)
🌐▬▬▬▬LINKS▬▬▬▬▬▬▬▬▬▬▬▬▬▬🌐
Product link: https://noxl.ink/Zveaik
Prices (as of 18.6.2024):
369€ for basic Version (only drone + 1 battery)
30€ for additional battery
30€ for the charger
they also give you a free case....
429€ Bundle: Drone + 2 batteries + charger + case
I'd get 2 batteries minimum!
I deliver honest opinions, well researched and tested (sometimes "almost scientific" ;) reviews! If you can support this idea please check my PATREON 🙏
📋 Infos (covered in this test):
Many components shared with k1
+ LARGER buildplate!
+ Lidar
+ spare hotend and nozzle
+ Glass top lid
+ filament sensor inside
🐳Orca Wifi print only with rooted Klipper
- but device tab can show crealitys gui
- upload and print over that if one doesn't wanna root and update!
Tip: You have to HOME all axis before you can start printing this way
Error msg: "please return to the printer..."
really means "home the printer axis"
- came with pretty old firmware (1.3.0.39 from July/2023) and said this is the most current?
I had the chance to see this very interesting drone in action, chase it, lift some weights (the nerdy way) and of course listen to the amazing sound of eight 54" props.
Thanks to Bernd Kager and GlobeFlight for inviting me to this very interesting demo flightday!
If you are interested in this solution, just comment or mail (at RCSchim@gmx.at) and I will forward the contacts.
Pricetag seems to be around 30k€ tho ;)
TECHSPECS: 📋
- Payload: 30kg (with dual batteries, more range)
40kg (single battery, less range)
- max operational alt: 6000m
- max flight distance
with payload: 16km (10mi)
without: 28km (17,4mi)
- Top speed: 20m/s (72kph - 44mph)
- Props: 54" (x8)
- 4kW power ⚡ per motor (32kW in total!)
- Video range: O3 - 20km
- dual operator mode with handover
- dual batteries:
DB2000: 38ah - 52v (14cell)
Charger: C8000, 7.2kW max charge power
- emergency parachute:
min 60m alt needed! either engaged by operatur thru button or auto deplay in unsafe flight conditinos / detected failures
- dual radars for proper obstacle avoidance :) of course it also has normal visual sensors additionally
🌐▬▬▬▬LINKS▬▬▬▬▬▬▬▬▬▬▬▬▬▬🌐
https://www.dji.com/at/flycart-30https://www.globe-flight.de/DJI-FlyCart-30-DE
I deliver honest opinions, well researched and tested (sometimes "almost scientific" ;) reviews! If you can support this idea please check my PATREON►TOP Videos
►Mountain DIVES
►Product REVIEWS
🎥▬▬▬EQUIPMENT▬▬▬▬▬▬▬▬▬▬▬▬🎥
my Hangar: http://goo.gl/QNzck
Filmed with: Sony A7c, Mavic 3, Chimera 4 (with O3), edited with Premiere Pro
♫▬▬▬▬MUSIC▬▬▬▬▬▬▬▬▬▬▬▬▬▬♫
Level Up - Raccy
Wanted to use this song in a scenery surfing drone compilation now since a long time. It describes the mood of running low on daylight and how it affects us in the winter (not only the low vitamin D) but how much of a relieve the spring will be then...
This all being said (and sung by the fabulous "Pink Laundry") we still had a good ammount of flyable weather this "winter" - and real snow only on the highest peaks.
Foxeer Aura 7, Aura 10 (plus a lot of jello that I can't get rid of)
iFlight Chimera 4
mostly with DJI O3 and ND16 - some shots with Gopro11mini
TBS Crossfire and Tango2
normally I use EPIDEMIC SOUND, get your account here (affiliate): https://bit.ly/3p6OGE0
╔═╦╗╔╦╗╔═╦═╦╦╦╦╗╔═╗
║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣ → http://goo.gl/szFJv
╠╗║╚╝║║╠╗║╚╣║║║║║═╣ (best way to support me!)
╚═╩══╩═╩═╩═╩╝╚╩═╩═╝
Find a lot of information hopefully in an quick and entertaining review, honest, curious, funny ;) I've been positivly surprised! Such a great addition to my DIY machines in the hangar - perfect companion to an 3D Printer!
I deliver honest opinions, well researched and tested (sometimes "almost scientific" ;) reviews! If you can support this idea please check my PATREON
🛒 Pricetag: 906,10€ (directly at Creality - with coupon "FNPALL10" but how long? they don't even list this code anymore there ;)
💡Tips and settings
✅ get Lightburn (free trial for a month), then 60€ for a license (with coupon "NEW-10" its 50€!)
✅ ensure that the focal length of the laser module is correct and the lens of the laser module is clean when powered off (It can be cleaned with cloth and alcohol)
✅ parameters are for reference only because the color of the material is different and it will lead to a different effect ENGRAVE / CUT
✅ higher power or slower speed means deeper cut
✅ lower power or faster speed make shallower effect (engrave)
✅ on brushed stainless steel can achieve colorful effects by setting different parameters, but the oxidation degree of different materials is different, and slight differences in focal length and power will also affect the actual effect. It is recommended to do some tests on your material
✅ the bottom surface of the cutting place should be suspended (use honeycomb worktable or the included rods) when cutting
✅ protect your workbench (using aluminum plates or other materials that are not easily penetrated by laser)
✅ disable “Air” when engraving / enable ”Air” when cutting
Specs:
✅ enclosed Laser machine design; FDA Class 1 Safety Certification
✅ Integrated smoke expelling technique
✅ User surveillance Camera: laser spot positioning and creation record
✅ Switchable laser module:
22w (ultra fine cutting) 1cm basswood in one pass
40w (stronger power) 2cm basswood in one pass
+ additional 1.6w module, for fine engraving
✅ Drawer Design: Simply pull, pour and wipe to easily clean up the debris
✅ Fence Type Protection Strip, Heat and Smoke Dissipation
📋 Ext. Dims: H: 33,5 cm D: 66,5 cm W: 57 cm (but 67 cam with cables!)
int. Dimensions (this is the max size of your object to be cut): W: 56 cm D: 62 cm H: 13 cm (or more without bottom drawer!)
useable Laser Workspace: 40 x 41.5 cm, (13 cm max height)
⭐ Disclaimer: Creality sent me this product for review but they have not seen this video beforehand. My opinions are my own, I’m NEW to laser cutter – but I’m a tech guy, reviewing a lot of different tech here (drones, 3d printers, cameras) and I do my research.
●▬▬▬LINKS▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬●
Creality Falcon 2 pro Laser cutter / engraver (coupon: "FNPALL10" 💡)
Software "Lightburn": (use the code "NEW-10" 💡)
●▬▬▬EQUIPMENT▬▬▬▬▬▬▬▬▬▬▬▬▬●
my Hangar: http://goo.gl/QNzck
Filmed with: Sony A7c, Panasonic GH5, Samsung Galaxy S10, edited with Premiere Pro
●▬▬▬♫MUSIC▬▬▬▬▬▬▬▬▬▬▬▬▬▬●
Slam Dunk - FLYIN
I use EPIDEMIC SOUND, get your account here (affiliate): https://bit.ly/3p6OGE0
What's in the box?
3D Scanner module (4 cams, was macht was?)
hotshoe / tripod screw mountable
mini tripod + (battery) grip (5ah 3,7v)
phone clamp mount
Wifi6 bridge
...and lots of cables (good quality with screws to prevent disconnect)
Software avail as download for Windows/Mac, Android or IOS
The cam-preview(s) via USB3 cable on the PC are much smoother and easier to work with - than on the phone via wifi (at least on my older Galaxy S10)
Tip: use the scroll wheel of your mouse to zoom in the live view during scanning!
- WIFI box für LAPTOP: works, but a but slower - wireless - larger scans...
- cam preview speed slower (fewer FPS) than with USB3 of course
SCANNING TIPS:
-use a round-table ("lazy susan"), but no need for a motorized one...
-start scanning looking at the obj from top down (30°?), make a few rounds
than change cam angle slowly to view from the round table floor height slightly upwards
- always keep an eye on the preview, it should be gree - if RED - stop and go back a bit
- for complex parts, consider doing 2 scans and use the merge function to combine them!
- use enough light (or it will loose tracking)
maybe adjust the IR light exposure manually for better results
- be slow and steady on your scans (or it will loose tracking)
- use the "close Object" option!!! Makes it possible to print it!
- use cut tool in slicer (Orca) to remove unwanted groundplate...
●▬▬▬LINKS▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬●
Buy the Scanner here: https://www.geekbuying.com/go/8JsMWFEv(Afilliate)
Coupon code: NNNDECRPRO (349€!)
Software and downloads: https://www.creality.com/pages/download-cr-scan-ferret
(it's a bit hard to find the correct pages on their website layout :)
Help Page: https://wiki.creality.com/en/3d-scanner
